![background image](http://html1.mh-extra.com/html/makita/bss500z/bss500z_technical-information_3895307006.webp)
P 6/14
[3] DISASSEMBLY/ASSEMBLY
[3] -2. Safety Cover Complete and Bearing Box Section
R
epair
1) Assemble Bearing box section by doing the reverse of the disassembling steps, and install it on the machine.
(Fig. 7 on page 4)
Note: Before assembling Helical gear 23 to Spindle, make sure that O ring 26 is installed on Bearing box
as illustrated to right in Fig. 11 on page 5.
2) Assemble Safety cover complete to the machine.
Note 1: Do not forget to assemble Thickness ring to Bearing box, before assembling Safety cover. (Fig. 12)
Note 2: When linking Safety cover complete to Blade case with Tension spring 4, hook each end of Tension spring 4.
as illustrated in Fig. 13.
Fig. 12
Apply machine oil to the outer surface of
Thickness ring for smooth movement of
Safety cover complete.
Bearing box
section
Blade side
Tension spring 3
Gear
housing side
Fig. 13
Blade case
Safety cover
Hook this end of Tension
spring 3 through the hole
in Blade case from Blade
side.
Hook this end of Tension
spring 3 through the hole
in Safety cover from gear
housing side.
Thickness
ring
[3] -3. Gear Unit [that engages with Armature]
Tapping screw
4x18 (8 pcs)
Handle L
1) Remove Handle L from Handle R by unscrewing eight 4x18 Tapping screws. Remove the assembly of Gear housing
and Motor section from Handle R by unscrewing three 4x35 Tapping screws. (Fig. 14)
Handle R
Tapping screw 4x35 (3 pcs)
Gear housing
Motor section
Fig. 14
DISASSEMBLING
ASSEMBLING