P 6/ 13
[3] DISASSEMBLY/ASSEMBLY
[3] -5. Spring Section (cont.)
R
epair
Guide bolt
Wrench 8
Hex
Nut M6
Holder
Flat
Washer 6
Rail
Guide bolt
Cushion
Cushion
Cushion is fit into the groove of Guide
bolt firmly. Therefore, twist Cushion to
pull it off from the groove.
Turn compression spring 17 counterclockwise while
holding Spring holder with gloved hands.
Spring holders is removed from Compression spring 17.
After removing Guide bolt and Flat washer 8, remove
Spring holder of the opposite side in the same way
illustrated in Fig. 21.
Note: When inserting Spring holder into Compression
spring 17, turn Compression spring 17 clockwise
and twist Spring holder to set in place.
Turn guide bolt counterclockwise
while gripping holder by a gloved
hand.
M6 hex nut, Holder with Rail and
Flat washer 6 are removed from
Guide bolt.
Hammer
Fig. 19
Fig. 20
Fig. 21
Fig. 22
Fig. 23
Spring holder
Spring
holder
Compression
spring 17
Flat washer 8
Guide bolt
3) Disassemble the Spring section in order from Fig. 19 to Fig. 22. Spring section is removed as illustrated in Fig. 23.
Hex
Nut
Holder
Spring holder
Rail
Cushion
Hammer
Flat washer 6
Flat washer 8
Spring holder
Guide bolt
Compression spring 17
DISASSEMBLE
