P 6 / 28
R
epair
[3] DISASSEMBLY/ASSEMBLY
[3] -2. Gear housing complete section
DISASSEMBLING
4. Remove Head cover L (22).
5. Remove Top cover section (7) by unscrewing
four 4x16 Tapping screws.
(7)
(12)
6. Disassemble Gear housing complete (25)
by unscrewing four 4x30 Tapping screws (24).
7. Remove Retaining
ring S-10 (41) with 1R291.
The following parts are
removed from Inner
spindle complete.
(36) Cover
(37) Flat washer 10
(38) Thrust needle gauge
(39) O ring 26
(40) Flange
(6)
Fig. 7
Fig. 8
Fig. 9
Fig. 10
Section (7)
(24): 4 pcs.
Screwdriver
(25)
(33)
(41)
(36) (37)
(38) (39)
(40)
(41)
1R291
< Note >
Internal gear 34 (12) interferes with
Screwdriver.
Unscrew 4x30 tapping screws (24) while
turning Balancer (33).
Inner spindle complete
(22)
