![background image](http://html1.mh-extra.com/html/makita/bhr261/bhr261_technical-information_3974717015.webp)
P 1
5
/ 2
1
R
epair
[3] DISASSEMBLY/ASSEMBLY
[3]-7. Impact bolt in Tool holder complete (BHR261)/ Tool holder guide complete (BHR261T)(cont.)
ASSEMBLING
Fig. 43
Cushion ring 13
Ring 10
O ring case with
O ring 9 fit inside
Impact bolt
1)Assemble Impact bolt section to Tool holder (guide) complete as illustrated
in
Fig. 43
.
Tool holder (guide) complete
Sleeve 9
Bit (chuck)
installation
side
Inner housing
complete side
long
short
Fig. 44
Note: 1)
Use an extra Piston cylinder as a jig. Never use Piston cylinder that is to be assembled to the machine.
2) Do not align the clearance of Ring spring 28 with two holes of Tool holder (guide) complete illustrated below.
2) Push Ring spring 28 into the inner groove of Tool holder (guide) complete
as illustrated in
Fig. 44.
Piston cylinder
as a jig
Piston cylinder as a jig
Tool holder
(guide)complete
Ring spring 28
clearance
hole
Inner groove of
Tool holder (guide)
complete
Ring spring 28
O ring case
Note
: The components are directional. Pay attention to the directions.
hole