P
4
/ 1
4
R
epair
[4] ASSEMBLING/ DISASSEMBLING
[4]-1. Head valve section
Compression
spring 4 (9pcs.)
Top cap
complete
Top cap
gasket
M6x30 Hex socket head bolt (4pcs.)
(1) Disassemble Top cap from Housing set as illustrated in Fig. 3.
(2) Disassemble Rear cushion from Top cap as illustrated in Fig. 4.
Housing set
Housing set
Remove four M6x30 Hex socket head bolts from Housing set.
Do not lose nine Compression springs 4.
Filter can be removed from Top cap.
Rear cushion remains in Top cap
Filter
Head valve
Head valve guide
Remove Head valve.
O-ring 6
Remove Top cap gasket and O-ring 6.
Do not lose O-ring 6.
Rear cushion
Top cap complete
Air duster
While filling one of two holes of Rear cushion
with finger, blow the air into the other hole
with air duster.
Rear cushion rises and can be removed from
Top cap complete.
Fig. 3
Fig. 4
1) Assemble Rear cushion to Top cap.
2) Put nine Compression springs 4 into holes of Top cap complete.
3) Fit Head valve into Top cap complete carefully so as not to lean
any Compression springs 4. (Fig. 5)
DISASSEMBLING
Fig. 5
ASSEMBLING
Two holes
Compression
spring 4 (9pcs.)
Head valve
Top cap
complete
