P 1
2
/ 1
4
R
epair
[4] DISASSEMBLY/ASSEMBLY
[4]-7. Driver guide section, Feeding mechanism (cont.)
(1) Assemble O ring 14 to Piston (for Nail feeding), and mount O ring 9 to the cylinder portion of Driver guide.
Refer to Fig. 24.
(2) Assemble Feeding claw and Piston as illustrated in Figs. 25 and 26.
Fig. 25
Feeding
claw
Feeding claw
Piston
Making sure that Piston’s tip
presses the Compression
spring 3, pull off slotted
screwdriver.
Setting Feeding claw to Driver guide,
mount Compression spring 3 to
the elliptic hole of Feeding claw.
While pressing Compression spring 3
with slotted screwdriver, insert Piston
into Driver guide.
And push Piston to the position where
the tip can press Compression spring 3.
Fig. 26
ASSEMBLING
Compression
spring 3
Piston
Piston
Slotted screwdriver for pressing
Compression spring 3
Urethane ring 3
Pin 4-4.5
Piston
Join Piston and Feeding claw with Pin 4-4.5
and Urethane ring 3.
Feeding
claw
Cup washer
Compression
spring 9
Driver guide
Secure the component parts with Retaining ring R-24
as illustrated below.
Compression
spring 10
Rubber ring 14
Retaining
ring R-24
