P 1
1
/ 1
4
R
epair
[4] DISASSEMBLY/ASSEMBLY
[4]-7. Driver guide section, Feeding mechanism (cont.)
DISASSEMBLING
(4) Disassemble Feeding mechanism as illustrated in
Figs. 23
and
24
.
Fig. 23
Fig. 24
Cup washer
Compression
spring 9
Driver guide
Compression
spring 10
Rubber ring 14
Retaining
ring R-24
Cup washer
Urethane ring 3
3. Push out Piston while holding
Feeding claw with finger so that
Compression spring 3 does not
jump off Driver guide.
Remove Retaining ring R-24 while holding
Cup washer with your finger.
Because Cup washer is slung by Compression
spring 9 and Compression spring 10.
Now the following parts are disassembled
from Driver guide.
Piston and Feeding claw still remain in
Driver guide in this step.
Retaining ring R-24
1. Remove Urethane ring 3 with
slotted screwdriver.
2. Pull off Pin 4-4.5 by pulling off
with pliers toward nail driving
direction.
Pin 4-4.5
Piston
Piston
Feeding claw
Compression
spring 3
Feeding claw
Feeding claw, Compression
spring 3 and O ring 9 can be
removed after removal of Piston.
O ring 9
Piston
O ring 14
Remove O ring 14 from Piston.
