Makita AC320H, Инструкция по эксплуатации

Страница: 4 / 228

4
compressor it must be disconnected from
the power supply.
.......... Risk of high temperatures
Caution: the compressor contains some
parts which might reach high
temperatures.
.......... Risk of accidental start-up
Attention, the compressor could start
automatically in case of a black-out and
subsequent reset.
.......... Wear safety glasses.
............. Only for EU countries
Do not dispose of electric equipment
together with household waste material!
In observance of European Directive
2002/96/EC on waste electrical and
electronic equipment and its
implementation in accordance with
national law, electric equipment that have
reached the end of their life must be
collected separately and returned to an
environmentally compatible recycling
facility.
The compressors are manufactured to
meet RoHS directives.
IMPORTANT SAFETY
INSTRUCTIONS
WARNING:
READ AND UNDERSTAND ALL
INSTRUCTIONS
Failure to follow all instructions listed below
may result in electric shock, fire, and/or serious injury.
SAVE THESE INSTRUCTIONS.
WORK AREA
1. Keep your work area clean and well lit. Cluttered
and dark areas invite accidents.
2. Do not operate power tools in explosive
atmospheres, such as in the presence of
flammable liquids, gases, or dust.
Power tools
create sparks which may ignite the dust or fumes.
3. Keep bystanders, children, and visitors away
while operating a power tool.
Distractions can cause
you to lose control. Protect others in the work area
from debris such as chips and sparks. Provide barriers
or shields as needs. Children should never be allowed
in the work area.
4. The adequate room temperature is +5°C to +30°C.
(0°C to +40°C at Maximum)
5. This compressor is for indoor use. Do not install
the compressor in any place exposed to rain or
splashed water, high-humidity place or high-
temperature place. Never operate the compressor
in damp or wet locations. If use in the wet
condition, it could produce an electric shock or be
short-circuited, resulting in ignition.
6. Never use the machine in any unstable place.
Never use it in a place where it could move or fall
of itself. Be sure to install the compressor on a flat
floor, with leg rubber underneath it; the allowable
tilt angle of the floor is up to 10 degrees. If the
installation floor is tilted and slippery, ensure that
the compressor does not move during operation.
Do not use it on a shelf or stand where it may fall
or tumble.
WARNING:
IMPROPER OPERATION OR MAINTENANCE OF THIS
PRODUCT COULD RESULT IN SERIOUS INJURY AND
PROPERTY DAMAGE.
READ UNDERSTAND ALL WARNING AND
OPERATING INSTRUCTIONS BEFORE USING THIS
EQUIPMENT.
WARNING:
Risk of Unsafe Operation
WHAT CAN HAPPEN
Unsafe operation of your compressor could lead to
serious injury to you or others.
HOW TO PRIVENT IT
• Review and understand all instructions and warnings in
this manual.
• Become familiar with the operation and controls of the
air compressor.
• Keep operating area clear of bystanders, pets, and
obstacles.
• Keep children away from the air compressor at all
times.
• Do not operate the product when fatigued or under the
influence of alcohol or drugs. Stay alert at times.
• Never defeat the safety features of this product.
• Do not operate machine with missing, broken, or
unauthorized parts.
• Use the outlet of the building installation with a proper
protection for the power supply of this compressor.
Failure to use a proper protection for the power supply,
it may cause electric shock and damage to the
compressor.
• Never connect the compressor to an engine generator
or direct-current power supply. Operate the
compressor by those power supply can cause damage
the unit and burn out the motor.
• Never use a transformer for the power supply of this
compressor. If using a transformer for the power supply
of this compressor, it can lead to malfunction.
• If the compressor appears to be operating unusually,
making strange noises, or otherwise appears defective,
stop using it immediately and arrange for repairs by an
authorized service facility.
WARNING:
Risk of Air Tank Bursting
WHAT CAN HAPPEN
The following conditions could lead to a weakening of the
tank, and RESULT IN A VIOLENT TANK EXPLOSION