P 10/16
[3] DISASSEMBLY/ASSEMBLY
[3] -2. Stopper Base Section
R
epair
DISASSEMBLING
Disassemble by taking the steps described in Fig. 28 to Fig. 31.
Fig. 28
Fig. 29
Fig. 30
Fig. 31
Guide box complete
Guard
Stopper base
slotted screwdriver
1) Remove Guide box complete from Stopper base together with
Guard first by inserting slotted screwdriver into the rectangular
hole of Stopper base, then by pushing Guide box complete
with the screwdriver.
rectangular hole
Guard
Guide box complete
2) Separate Guard from Guide box complete.
1R266
1R032
3) Guide box complete can be disassembled as illustrated below
using 1R032, 1R266 and arbor press.
(The parts with asterisk: one each on left and right side)
4) Cap can be removed from Stopper base
using slotted screwdriver.
Pin 2*
Guide*
Torsion spring 4*
Guide box
Stopper base
Cap
[3] -3. Clutch Section and Helical Gears
DISASSEMBLING
Disassemble by taking the steps described in Fig. 32 to Fig. 37.
Fig. 32
Fig. 33
1) After removing Casing assembly (Fig. 2
on page 3), remove Belt clip from Housing
by unscrewing M5x13 Screw.
2) Remove Housing (R) from Housing (L) by unscrewing ten
4x20 Tapping screws. Assembly of Screw guide and Guide
attachment can be removed in this step.
Housing
Belt clip
M5x13 Screw
Housing (R)
4x20 Tapping screw
(10 pcs)
Housing (L)
Assembly of Screw guide and Guide attachment
