![background image](http://html.mh-extra.com/html/makita/113443/113443_instruction-manual_229995004.webp)
4
ENGLISH (Original instructions)
Explanation of general view
SPECIFICATIONS
• Due to our continuing program of research and development, the specifications herein are subject to change without
notice.
• Specifications may differ from country to country.
• Weight according to EPTA-Procedure 01/2014
Intended use
ENE065-1
The tool is intended for cutting fiber cement material only.
Power supply
ENF002-2
The tool should be connected only to a power supply of
the same voltage as indicated on the nameplate, and can
only be operated on single-phase AC supply. They are
double-insulated and can, therefore, also be used from
sockets without earth wire.
General power tool safety
warnings
GEA010-2
WARNING: Read all safety warnings, instructions,
illustrations and specifications provided with this
power tool.
Failure to follow all instructions listed below
may result in electric shock, fire and/or serious injury.
Save all warnings and
instructions for future reference.
The term “power tool” in the warnings refers to your
mains-operated (corded) power tool or battery-operated
(cordless) power tool.
CEMENT SHEAR SAFETY
WARNINGS
GEB032-2
1.
Hold the tool firmly.
2.
Secure the workpiece firmly.
3.
Keep hands away from moving parts.
4.
Edges and chips of the workpiece are sharp. Wear
gloves. It is also recommended that you put on
thickly bottomed shoes to prevent injury.
5.
Do not put the tool on the chips of the workpiece.
Otherwise it can cause damage and trouble on the
tool.
6.
Do not leave the tool running. Operate the tool
only when hand-held.
7.
Always be sure you have a firm footing. Be sure
no one is below when using the tool in high
locations.
8.
Do not touch the blade or the workpiece
immediately after operation; they may be
extremely hot and could burn your skin.
9.
Avoid cutting electrical wires. It can cause serious
accident by electric shock.
10.
Some material contains chemicals which may be
toxic. Take caution to prevent dust inhalation and
skin contact. Follow material supplier safety data.
11.
Always use the correct dust mask/respirator for
the material and application you are working with.
SAVE THESE INSTRUCTIONS.
WARNING:
DO NOT let comfort or familiarity with product (gained
from repeated use) replace strict adherence to safety
rules for the subject product. MISUSE or failure to
follow the safety rules stated in this instruction
manual may cause serious personal injury.
FUNCTIONAL DESCRIPTION
CAUTION:
• Always be sure that the tool is switched off and
unplugged before adjusting or checking function on the
tool.
Switch action (Fig. 1)
CAUTION:
• Before plugging in the tool, always check to see that
the switch trigger actuates properly and returns to the
“OFF” position when released.
1. Switch trigger
2. Lock button
3. Hook
4. Hex wrench
5.
Loosen
6.
Screws
7.
Cutting head
8.
Side blade
9.
Center blade
10. Pivot sleeve
11. Spacer
12. Reposition end-to-end
13. Reposition left-to-right
14. Tighten
Model
JS8000
Max. cutting capacities
Fiber cement material
8 mm
Strokes per minute (min
-1
)
0 - 2,500
Overall length
346 mm
Net weight
2.2 kg
Safety class
/II
Содержание 113443
Страница 2: ...2 1 2 3 4 5 6 7 8 1 2 3 A B 4 5 6 7 8 9 6 8 7 8 9 8 10 11 12 13 4 14 6 ...
Страница 3: ...3 9 ...
Страница 31: ...31 ...