8 ENGLISH
Oblong punching
Punch
Die
Workpiece
Capacity
Flat bar
Max: 80 mm x t8
(Center punching)
Angle
Min: 40 mm x 40 mm x t3
Max: 80 mm x 80 mm x t8
Channel
Min: 75 mm x 40 mm
Max: 100 mm x 50 mm
(Flange punching)
Unit: mm
Punch
Die
Tensile
Channel
Tensile
Mild Steel (65,000 psi)
Stainless Steel (89,000 psi)
6.5 x 10
6.5 x 10B
t2 - t6
-
t3 - t4
6.5 x 13
6.5 x 13B
t2 - t6
-
t3 - t4
8.5 x 13
8.5 x 13B
t2 - t6
-
t3 - t4
8.5 x 17
8.5 x 17B
t2 - t6
-
t3 - t4
9 x 13.5
9 x 13.5B
t2 - t6
-
t3 - t4
9 x 18
9 x 18B
t2 - t6
-
t3 - t4
10 x 15
10 x 15B
t2 - t8
t7.5
t3 - t6
10 x 20
10 x 20B
t2 - t8
t7.5
t3 - t6
11 x 16.5
11 x 16.5B
t2 - t8
t7.5
t3 - t6
12 x 18
12 x 18B
t2 - t8
t7.5
t3 - t6
13 x 19.5
13 x 19.5B
t2 - t8
t7.5
t3 - t6
14 x 21
14 x 21B
t2 - t8
t7.5
t3 - t6
Symbols
The followings show the symbols used for the equip
-
ment. Be sure that you understand their meaning before
use.
Read instruction manual.
Flying debris and loud noise hazards. Wear
ear and eye protection.
Hazardous voltage. Disconnect all power
before working on this equipment. Failure
to observe this instruction may result in
death or personal injury.
Moving blade. Keep hands clear while
machine is operating. Turn power off
before servicing.
Ni-MH
Li-ion
Only for EU countries
Do not dispose of electric equipment or
battery pack together with household waste
material!
In observance of the European Directives,
on Waste Electric and Electronic
Equipment and Batteries and Accumulators
and Waste Batteries and Accumulators
and their implementation in accordance
with national laws, electric equipment and
batteries and battery pack(s) that have
reached the end of their life must be col-
lected separately and returned to an envi
-
ronmentally compatible recycling facility.
Intended use
This tool is intended for piercing a hole on steel
material.