8 ENGLISH
MAINTENANCE
CAUTION:
•
Always be sure that the tool is switched off and
unplugged before attempting to perform inspec
-
tion or maintenance.
•
Clean out the upper and lower guards to ensure
there is no accumulated metal chips which may
impede the operation of the lower guarding system.
A dirty guarding system may limit the proper operation
which could result in serious personal injury.
When
using compressed air to blow metal chips out of the
guards, wear a proper eye and breathing protection.
•
Never use gasoline, benzine, thinner, alcohol or the
like. Discoloration, deformation or cracks may result.
Inspecting saw blade
•
Check the blade carefully for cracks or damage
before and after each use. Replace a cracked or
damaged blade immediately.
•
Continuing to use a dull blade may cause a danger
-
ous kickback and/or motor overload. Replace with a
new blade as soon as it no longer cuts effectively.
•
Carbide-tipped saw blades for metal cutter
cannot be re-sharpened.
Replacing carbon brushes
►
Fig.15:
1.
Limit mark
Remove and check the carbon brushes regularly.
Replace when they wear down to the limit mark. Keep
the carbon brushes clean and free to slip in the holders.
Both carbon brushes should be replaced at the same
time. Use only identical carbon brushes.
►
Fig.16:
1.
Screwdriver
2.
Brush holder cap
Use a screwdriver to remove the brush holder caps.
Take out the worn carbon brushes, insert the new ones
and secure the brush holder caps.
To maintain product SAFETY and RELIABILITY, repairs,
any other maintenance or adjustment should be per
-
formed by Makita Authorized Service Centers, always
using Makita replacement parts.
OPTIONAL
ACCESSORIES
CAUTION:
•
These accessories or attachments are recom-
mended for use with your Makita tool specified
in this manual. The use of any other accessories
or attachments might present a risk of injury to
persons. Only use accessory or attachment for
its stated purpose.
If you need any assistance for more details regard-
ing these accessories, ask your local Makita Service
Center.
•
Rip fence (Guide rule)
•
Safety goggle
•
Recommended Carbide-tipped saw blades &
workpiece ranges
NOTE:
•
Some items in the list may be included in the
tool package as standard accessories. They
may differ from country to country.
Applications
C-STUD
ANGLE-STUD
REBAR
PIPE
185X36T
185X38T
185X48T
185X70T
t=1.5
t=3.0
50X100
t=1.6
45X90
t=3.2
50X50
t=4
50X50
t=6
t=0.56
25 Ga
t=1.6
16 Ga
20
25
60
50X100
t=3.2
t=1.2
t=3.8
t=0-0.9 t=1.0-2.0
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
Excellent
X
Good
Carbide-Tipped Metal Blades for Many Applications
Size (mm)
METAL SHEET
METAL STUD
CORRUGATED
SHEET
Fair
Not Applicable
CAUTION:
•
Always use carbide-tipped saw blades appro
-
priate for your job. Do not cut aluminum, wood,
plastics, concrete, tiles, etc.
•
Carbide-tipped saw blades for metal cutting saw
are not to be re-sharpened.
Содержание 0088381056519
