MAKERGEAR M3-SE, Руководство пользователя

Страница: 18 / 20

Warranty & Support
New M3-SEs ordered from MakerGear or from an authorized MakerGear
distributor have a Twelve-Month Limited Warranty. MakerGear will
replace defective parts on M3-SEs that are under warranty. Replacement
parts may be new or refurbished and include free shipping in the US.
Non-US customers are responsible for shipping costs for replacement
parts.
The M3-SE has an open design (no proprietary cartridges) and M3-SE
owners are free to use third party filament. However, the MakerGear hot
end is only covered when MakerGear filament and authentic MakerGear
components are used. Due to variance in quality, MakerGear is unable
to provide technical support for issues related to third party filament. If
you are using filament or extruder components from a third party, you
must contact your supplier for technical support. The twelve-month
warranty offered by MakerGear does not cover printer abuse.
16
Technical Support lives on our website at
www.makergear.com/pages/support
Warranty
Exceptions
Support
Notice
This is a Class A product. In a domestic environment, this product may
cause radio interference requiring the user to take adequate measures
to mitigate. The MakerGear M3-SE can, in very rare cases, stop operating
due to electrostatic discharge (ESD). Operation can be restored by
turning the machine off and on again.