time.
12.
Do not wipe the labels with any cleaning tools that contain alcohol.
13.
Thermal inkless printing is a special printing technology. The printings might fade if it is
improperly used. We recommend sticking the label in room temperature in dry, flat, and
infrequently touched places.
14.
To prevent labels from jamming due to multiple printings, please remove and tear off the label
at the label exit after each printing task is finished.
15.
Do not disassemble the printer to avoid possible electrocution, mechanical injury, or causing
damage to the printer components and other accidents.
16.
Power off the printer immediately to avoid burns if the printer shows abnormalities such as
emitting smoke or odor, etc.
17.
To prevent unexpected situations, do not force to open the cover to remove the label roll when
the printer is operating.
18.
Do not touch the printhead to avoid burns because the printhead is still in a high-temperature
state after the printings have just finished.
19.
As the printhead is a precision component, and to better protect the printhead and extend its
life, it is recommended:
a.Not to print more than 2 meters for each continuous printing.
b.Not to print more than a total length of 20 meters per day.
19.
Due to the structural reason, the printhead is a fragile component, please pay attention to the
following notes to avoid corrosion.
a.Do not touch the printhead surface.
b.Do not use carbon ribbons or thermal labels that contain sodium, potassium, or chloride ions.
c.Printhead should be avoided contact with any liquids or wet objects.
d.Printhead can be only cleaned with anhydrous alcohol.
Troubleshooting
Description
Reasons and troubleshooting
Printer unable to power
on or shut-down occurs
Printer might run out of power.
Please try again after recharge.