Make Noise Rene, Руководство пользователя

Страница: 31 / 33

Calibration
31
René’s three CV Outputs are factory-calibrated to output 1 volt per octave as per the Eurorack standard for driving
V oltage C ontrolled O scillator s.
If you find that your VCO is mistuned, it is possible to calibrate each output to better drive a misbehaving VCO.
Keep in mind that a René channel’s calibration will not cause your VCO to better track other sequencers, and any
purposeful “mis - calibration” will likely result in even worse tracking on other VCOs.
To calibrate a channel’s output:
Remove all patch cables from your VCO, and from René.
Go to the Global Page by pressing Left+Right, and then pressing C/GBL .
Hold the Left button and press Button 13, 14, or 15 for the channel of your choice. (These are the first three
buttons on the top row of the Page Programming Grid, labeled I, II, and III.)
Left + Button 13: X-CV
Left + Button 14: Y-CV
Left + Button 15: C-CV
The button will light with the color of the channel you will be calibrating. The knobs will display a small “c”, and
one of the bottom three rows of the button grid will light with the channel’s color as well (see diagram s below).
Ready to calibrate X-CV