Make Noise PHONOGENE, Руководство пользователя

Страница: 7 / 15

7
15. RECord Pulse IN: toggles record on/ off. When recording from a cleared buffer, the
first record cycle sets the record length, so be sure to perform the ERASE Routine to
achieve a new recording. Sees only rising edge of signal. Needs at least 1.5V trigger
signal to operate.
16. RECord button: manual, momentary button to toggle record on/ off.
17. RECord LED indicator: when lighted, Phonogene is recording. When not lighted,
Phonogene is not recording. When flashing, Phonogene has entered the ERASE Rou-
tine.
18. SPLICE button: pushing drops splice marker on loop. When loop is Organized, the
splices (resulting audio segments) are re-arranged according to the Organize control
voltage as the Phonogene plays whichever splice is selected by Organize parameter.
Since splices may be erased, this process is nondestructive. Holding this button for 3
seconds enters ERASE Routine (REC LED will flash to indicate the ERASE Routine).
19. SPLICE Pulse IN: input for using external signal to splice loop. Sees only rising
edge of signal. Needs at least 1.5V trigger signal to operate.
20. End Of Splice OUT: outputs a short 4 ms pulse at the end of each splice. In the
absence of Splices, EOS reflects end of loop, which is always present when a recording
has been made.
21. End Of Splice LED indicator: lights to give visual feedback of End of Splice.
22. SLIDE Bipolar Panel Control: manual bipolar panel control for scanning the piec-
es of sound that result from setting Gene-Size to greater than 10%. Moves/ slides
through the Genes (aka grains). Allows for scrubbing of the recorded material and is
always dependent upon the GENE-SIZE setting.
23. SLIDE CV IN: bipolar control input for SLIDE. Range +/-4V.
24. SLIDE CV IN Attenuvertor: bipolar attenuator for SLIDE.
25. GENE-SIZE CV IN: unipolar control input setting size divisor of audio buffer, divid-
ing with respect to the buffer size as set by Record or Splice length. This parameter
“auto-splices” the recorded material like a machine, with no regard to source material.
Operates with great precision and the ability to cut pieces so small that the original
source material is completely unintelligible. Nondestructive. At 0V there is no effect.
Range 0V to +8V.
26. GENE-SIZE CV IN Attenuator: unipolar attenuator for GENE-SIZE.
27. GENE-SHIFT: clock signal at this input advances Phonogene to next Gene, in
chronological order. Always dependent upon the GENE-SIZE setting. Needs at least
1.5V trigger signal to operate.
28. GENE-SIZE Panel Control: manual unipolar control which sets Gene-Size divisor.