Make Noise Optomix, Руководство пользователя

Страница: 10 / 10

9
Patch Ideas:
The New Bongo:
Set up a VCO for Two-Operator FM by applying a SINE wave to its Linear FM input and patching the resulting
waveform to
OPTOMIX
’s CHannel 1
Signal IN
put. Patch
PRESSURE POINTS Common Gate OUT
put to the
OPTOMIX ’s CHannel1 STRIKE IN put and PRESSURE POINTS CHannel 3 GATE OUTput to the OPTOMIX ’s
CHannel 1
DAMP IN
put. Strike the “Bongo” by
<TAPPING> PP Touchplate 4
and “dampen” the bongo
during or after striking it by <TAPPING> PP Touchplate 3 . Use the DAMP Combo Pot to set the amount of
DAMPening.
FM Pings:
Patch an FM source such as an audio-rate SINE wave to
OPTOMIX
CHannel1
Signal IN
put. Patch the
CHannel1 OUT
put to the
Linear FM IN
put on
STO
or another VCO of your choice. Adjust
OPTOMIX
CONTROL Combo Pot full CCW (0%). Patch a Trigger or Gate source to OPTOMIX CHannel1 STRIKE IN put
to “ping” the destination VCO with a short burst of FM. Adjust the
DAMP Combo Pot
to taste.