EN
6
NOTE:
During operation, pressing the setting button only allows you to check the set
temperature but will not let you make any settings. If you need to make changes in temperature
or time, first press the button to stop the appliance. The temperature will start to flash and you
can repeat the adjustments according to the previous steps.
10
Press and hold the button for 3 seconds to turn off the appliance.
NOTE:The appliance has the function of temperature calibration. Press and hold the SET
button and ON/OFF button for 5 seconds. The current temperature will start flashing.
Press the + or - buttons to calibrate the temperature and confirm the calibration by pressing
the setting button. If no no button is pressed, will confirm automatically after 5 seconds.
INSTRUCTIONS FOR USE
WIFI CONNECTION INSTRUCTIONS
DOWNLOAD “SMART COOk” APP
A- Connect the MC-SV1 WiFi to your local Wi-Fi network (“AP Mode”)
NOTE:
The “AP Mode” is the mode that guarantees the connection of the equipment to any
router on the market that broadcasts at least one 2.4 GHz Wi-Fi network.
TO START THE CONNECTION IN “AP MODE” , PROCEED AS FOLLOWS:
1
The smartphone must be previously connected to a WI-FI network 2.4 GHz. If you
are connected to a network with a name ending in “_PLUS” or “_5G”, disconnect from it
because they are well-known names of 5Ghz networks and the
MC-SV1 WiFi
cannot
connect to those types of networks.
Although the
MC-SV1 WiFi
can be used manually through
its touch controls, it is possible to operate it remotely from a
smartphone or tablet, for this we have the official MakeCuisine
Smart Cook app where you have an extensive assortment of
automatic recipes in the cloud that can be cooked literally with
“just one touch”.
MakeCuisine’s “Smart Cook” application can be downloaded from the app store or by
scanning the Qr beside.
The app can be used without registration, but we recommend you to register in order to take
full advantage of its features.
