MAJORITY Humboldt, Инструкция по эксплуатации, Страница: 19 / 172

19
EN
Auto Scan
- Press the
SCAN/
12
button on unit or
SCAN
button on remote control to activate auto scan.
Alternatively,
- Press the
MENU
button, and then press
12 w
/
s 3
buttons to select
Scan
. Press the
SELECT
button
to confirm.
1. The display will show “
Scanning…
” and a progress slide bar.
2. All the stations that have been found will be stored automatically. To explore and listen to all
available stations, press
12 w
/
s 3
buttons to select and the press the
SELECT
button to confirm.
Manual Tuning
Extend the aerial fully and simply process manual tuning by following the steps below. This can help
you when aligning your aerial or when adding stations that were missed while auto tuning.
1. Press
MENU button to display the menu.
2. Press
12 w
/
s 3
buttons to select
Manual tune
, and press the
SELECT
button to confirm.
3. The display will show the multiplex 5A to 13F.
4. Press
12 w
/
s 3
buttons to select the channel, and press the
SELECT
button to confirm.
5. To listen to any stations found, return to the now playing screen and press
12 w
/
s 3
buttons to
select the required station from the station list and press
SELECT
button to confirm.
By pressing
INFO
button , you can view the available modes on your radio screen:
DLS (Dynamic Label Segment)
This is a scrolling message giving real-time information, e.g. song titles, news headlines, etc.
Programme Type
This describes the "style" or "genre" of the programme that is being broadcast.
Ensemble Name/Frequency
This display the name of the multiplex that contains the station you are listening to and the frequency.
A multiplex is a collection of radio stations that are bundled and transmitted on one frequency. There
are national and local multiplexes. Local ones contain stations that are specific to that area.
Signal Error/ Signal Strength
The error is shown as a number. If the number is 0, it means the signal received is error free and the
signal strength is strong. If the error rate is high, it is recommended to reposition the radio aerial or
reposition the unit. The display will show a slide bar to indicate the signal strength, the stronger the
signal, the longer the bar will be from left to right.
Bit Rate / Codec / Channels
The display will show the digital audio bit rate being received with additional information about the
audio codec and channel configuration.
Date
This displays the current date provided automatically by the broadcaster.
Instructions Guide