MAJORITY Humboldt, Инструкция по эксплуатации, Страница: 12 / 172

12
EN
Network
●
While in ‘System Settings’, press
12 w
/
s 3
to select
Network
. Press the
SELECT
button to confirm.
●
Press
12 w
/
s 3
buttons to select from the following settings, press the SELECT button to confirm
Network wizard SSID – select the desire wireless network.
Rescan – Scan for available networks.
Manual config – select wireless network with DHCP enable/disable.
PBC Wlan setup
Select
WPS
on the unit and press the
WPS
button on the modem device
that you wish to connect with. Press TUNING/SELECT dial on unit or
SELECT
button on remote control to continue.
View settings
Display the setting on the unit.
Manual settings Select wireless network with DHCP enable/disable.
NetRemote
PIN Setup To define a PIN number to be entered before being able to connect to
the unit remotely over a network
Network profile View the connected network.
Clear network
settings To delete the connected network memory in Network profile.
Keep network
connected To define whether remains connected to its network in Standby mode
and when not in Network radio mode.
3. Press the
BACK
button on the unit or remote control to cancel the setting and return back to the
previous menu.
Time/Date
The Time/Date can be automatically set once it has been connected to the Internet, DAB or FM radio
station with time/date information. You may also adjust the Time/Date manually.
Press
CLOCK
button on remote control can access
Set Time/Date
menu to adjust Time/Date,
Alternatively,
- In System Settings, press
12 w
/
s 3
buttons to select Time/Date and press the SELECT button to
confirm. Press
12 w
/
s 3
buttons to select
Set Time/Date
and press the
SELECT
button to confirm.
1. The date digits will flash on the display.
2. Press
12 w
/
s 3
buttons to adjust the day and then press the SELECT button to confirm.
3. Repeat above Step (2) to set the Month/Year/Hour/Minute.
4. The date and time settings are now complete.
Instructions Guide