Major tech MT915, Инструкция по эксплуатации

Страница: 6 / 12

6
3.2. TRANSMITTER
Display Two red LED lamps
Aligators 17 Croc clips-red*16,black*1
Cable resistance 30K Ohm max
Power 9V battery
Power current 1.8mA
Operating temperature 0°C to 40°C (32°F to 104°F)
Storage temperature
–10°C to 50°C (14°F to 122°F)
Function
Range
3.2. RECEIVER
Display Two digit blue LED display
Aligators 2 Croc clips-red*1,black*1
Power 9V battery
Power current 23mA
Operating temperature 0
°
C to 40°C (32°F to 104°F)
Storage temperature –10°C to 50°C (14°F to 122°F)
Continuity test Beep if less than 100Ω
Cable voltage check 5V to 16V DC
Function
Range
4. MEASURING PROCEDURE
4.1. Transmitter & Receiver Operation
1. At one end of the cable, connect one of the transmitter terminals
marked “CH1 to CH16” to each core of the cable under tester. Connect
the “COM”reference lead (black alligator) of the transmitter to a core
which is the only known one.
2. At the other end of the cable, connect the “COM terminal”(black
alligator) of the receiver. When the “input terminal” (red alligator) of
the receiver is successively touched on the cores of the cable under
test, the relevant number of the way is indicated on the display of the
receiver (1-16).
Operation example 1: Cable trace test
Operation example 2: Metal water pipe trace test
CAUTION: Though the units already build in the protection
circuit, do not apply voltage that is over 50V (AC or DCV) to
any alligator clips of the transmitter & receiver. Otherwise
the instruments may be permanently damaged.