Major Science Winpact SI-200, Руководство пользователя, Страница: 6 / 97

6
W
ARNING
This equipment has been tested and verified to comply with safety limits. These limits are
designed to provide reasonable protection against harmful interference when the equipment is
operated in a commercial environment. This equipment may generate, use, and radiate radio
frequency energy, and if not installed and used in accordance with the instruction manual, may
cause harmful interference with radio communications. Operation of this equipment in a
residential area is likely to cause harmful interference in which case the user will be required to
correct the interference at their expense. Changes or modifications not expressly approved by
the party responsible for compliance could void the user’s authority to operate the equipment.
It is strongly recommended that the user carefully read the following prints before operating
any equipment.
1. Read and follow the instruction manual thoroughly.
2. Do not modify the equipment. Failure to adhere to these directions could result in personal
and/or laboratory hazards, as well as invalidate the equipment warranty.
3. Use a properly grounded electrical outlet with correct voltage and current handling
capacity.
4. Disconnect the equipment from power supply before servicing and maintenance.
5. In the event of spilling solutions accidentally into the instrument, disconnect the grounded
plug and user must have an appropriate decontamination. And replace the damaged parts.
6. Do not use in the presence of flammable or combustible material, which may cause fire or
explosion. The instrument contains the components that can ignite such materials.
7. Refer maintenance and servicing to qualified personnel.
8. Ensure that the system is connected to electrical service according to local and national
electrical codes. Failure to properly connect may cause a fire or shock hazard.
9. Ensure the use of appropriate materials and correct operation to avoid possible hazards of
explosion, implosion or release of toxic or flammable gases arising from the heated
materials.
10. Handle the culture vessel with cares to prevent the glass vessel from any damages or
crashes, especially before and after autoclave / sterilization.
11. Always use the supplied handle or appropriate protection to handle the culture vessel to
prevent hands from heat burns, especially after autoclave/sterilization.