- 8 -
MAINTENANCE OF MOTORS
The motors used on the fan and the drum assembly are
prelubricated for extended bearing life and require no
further lubrication. However, periodic cleaning/vacuuming
of the fan/heater is recommended.
Make sure that the power is turned off
before proceeding.
CLEANING BRASS TRIM
Clean the brass trim using a soft cloth, slightly dampened
with lemon oil and buff with a clean soft cloth. Do NOT use
brass polish or household cleaners as these products will
damage the brass trim. Lemon oil can be obtained at
supermarkets or hardware stores.
ELECTRICAL DIAGRAM
Wiring Colour Code:
WH =
White
BL =
Black
RE =
Red
Any electrical repairs or rewiring of this unit should be carried out by a licensed electrician in accordance with national and
local codes.
If repairing or replacing any electrical component or wiring, the original wire routing, colour coding
and securing locations must be followed.
Component Identification:
1.
CFM-Majestic Factory Wire Required
2.
Plug 0.093" Pin & Socket
3.
Light Socket Assembly
4.
Light Socket w/ Wiring Assembly
5.
Light Bulb
6.
Cord Power
7.
Strain Relief
8.
Breaker Circuit Manual Reset
9.
Motor Variable Speed 12 VDC
10. Grommet 7/8
Component Identification:
11. Nylon Cable Tie 3-7/8"
12. Potentiometer
13. Dimmer SwitchRotary Assy
14. Thermostat
15. Switch
16. Speed Control
17. Receptacle Pin & Socket
18. Fan/Heater
9 BLACK
7 WHITE
6 BLACK
14
13
SWITCH
2 RED
1WHITE
2 RED
1WHITE
WHITE
18
MOTOR
FAN
HEATER ELEMENT
17
WHITE
BLACK
8 WHITE
6 BLACK
2 BLACK
8 WHITE
4
(OPTIONAL)
BREAKER CIRCUIT
8
18
2
AIR WHEEL FAN/HEATER WIRING DIAGRAM
1 BLACK
3 RED
7 WHITE
MOTOR
FAN
HEATER ELEMENT
11
9
16
15
12
11
17
10
11
3
5
10
11
5
19
11
6
7
10
WHITE
LIMIT
SWITCH
T' STAT
5 WHITE
4 BLACK
POTENTIOMETER
BLACK
RED
3 RED
SPEED CONTROL
MOTOR
DRUM
