- 17 -
3) RHEFA and RHEFP TRIMS
Glass
Frame
Louvre
Note:
Position brass trim top as
shown (small end up)
to prevent heat discolouration
Fig. 14
Fig. 15
1.
Remove the front glass (see "Glass Frame Re-
moval" section).
2.
Install support window trim channel, top and bottom
brass trim by using the shortest black screw. (Fig.
14 & 15).
TRIM ASSEMBLY
3.
Install bottom decorative plate by simply sliding it
under the unit floor. No fastening is required for
this installation (See Fig. 16). Be sure to remove
protective cover.
4.
Install the bottom louvre assembly by fastening
the hinges with four screws to the pre-punched
holes in the cabinet.
5.
Re-install the front glass.
6.
Install the top louvre by using the hooks to hang it
in place.
KEY
DESCRIPTION
RHEFA
RHEFP
1
Trim Window Top/Bottom
52624-AB
52624-PB
2
Plate Decorative Bottom
17597-AB
17597-PB
3
Top Louvre Assembly
57905
57905
4
Bottom Louvre Assembly
57906
57906
5
Support Window Trim Channel
57909
57909
6
Hinge
52356
52356
7
Fasteners Package (Not Shown)
57916
57916
ALL repair parts will be available from your local dealer.
When ordering, always give the following information: Model and serial number, part description with finish and part
number;
1
2
3
4
6
5
TRIM REPLACEMENT PARTS LIST
BOTTOM
DECORATIVE PLATE
Fig. 16
TRIM-TOP
GLASS FRAME
TRIM-BOTTOM
screws
