Majestic STR33 Скачать руководство пользователя страница 12

12

STR Series Woodburning Fireplaces

7412961

 Installing the Chimney System

Start by attaching the first chimney section to the collar 
on top of the fireplace.

  

Install the pipe as pictured in Figure 16. When  you 
get a good lock, you will hear the pipe clearly snap 
together. Once sections are snap-locked in place, it is 
extremely difficult to get them apart. 

Make sure the 

pipe is firmly snapped and locked together as each 
pipe section is mounted.

When installing elbows, only outer pipe will snap- 
lock.  Middle pipes simply slide into position. Be sure 
to always attach straps on upper elbow to a structural 
framing member. (Fig. 17)
Continue installing the pipe as required until pipe is 
installed up through the ceiling. At this point, you must 
install a firestop spacer. Refer to Figure 18 for appropri-
ate spacer orientation.

Installing the Firestop Spacer 

in the Ceiling Hole

A firestop spacer is used to keep pipe spaced properly 
and required for safety.
Nail the firestop spacer (at each corner) to the framing 
members of the ceiling hole. 

NOTE: 

 A firestop spacer 

is not required at the roof.
Hole sizes listed in Figure 12 for angled firestop spac-
ers provide minimum required air space to chimney 
pipe for ceiling thickness up to 8" (203 mm).  When 
combined thickness of ceiling material, ceiling joists 
and flooring material exceeds 8" (203mm), adjustments 
must be made in framing to assure that minimum air 
spaces to chimney are maintained.

Proper Firestop Spacer Installation

Figure 18 shows different installation procedures for  
both an area that 

is

 an attic and  an area that 

is not

 an 

attic.
If the area above the ceil-
ing

 is not 

an attic, posi-

tion the firestop spacer 
with the flange on the ceil-
ing side and the angled 
portion extending up into 
the hole.
If the area above the 
ceiling 

is

 an attic, position 

the firestop spacer with 
the flange on the top of 
the framed hole and the 
angled portion extending 
down into the hole.

FP711

Fig. 16 

 Install pipe, listening for the snap-lock to fasten.

UP

Lance

Hem

Pipe Rim

Pipe 

  Rim

WF711

STR/CVR

5/28/98

Pipe Section

Fig. 17 

 Attach straps to a structural framing member.

FP270/271

FP270/271

CR Series

2/19/99   djt

Elbow Strap

Support Structure

Elbow Strap

(must be tight)

Ceiling 

Hole Fram-

ing

Angle Firestop

Chimney Support 

Strap

(must be tight)

Angled Strap

FP593

SR/C

11/20/97

Attic Installation

Ceiling Installation

Fig. 18 

 Installing firestop spacer.

FP593

Nails (4)

Firestop 

Spacer

Joist

Joist

Firestop 

Spacer

Nails (4)

NOTE:

 If the attic insulation shield is used, the 

firestop is not required in the attic installation.

Содержание STR33

























Отзывы: