23
Vermont Castings Majestic Products NV360/580 Series
20003565
Remote Controls
Optional remote control units are available to control
different functions of the appliance.
Model
Function/s Controlled
MRC1
“ON/OFF”
MRC2
“ON/OFF” and Temperature
MRC3
“ON/OFF” and Temperature control
with a digital and a programmable 24
hour clock
IMT
Wall mounted thermostat control
Ceramic Refractory Lining
1. Remove glass and logs.
2. Insert supports under ceramic hearth panels.
(Fig. 32)
3. Remove three (3) screws securing heat shield to
combustion dome. (Fig. 33)
4. Place rear ceramic panel in back of unit. (Fig. 34)
5. Place side panels.
6. Replace heat shield, logs and glass.
Rear Ceramic Panel
Burner
Rear Log
Support
Back of
Firebox
H102
Fig. 34 Rear ceramic panel placement.
Decorative Frame Trims
A selection of decorative frame trim kits are available
for mounting around the outside of the appliance to
enhance its visual effect on the room. Installation
instructions for each decorative frame trim are included
with the frame trim kit. Contact your authorized dis-
tributor for details of the trim kits and ordering informa-
tion for the trim kits applicable to this model appliance.
Burner
Grate
Ceramic
Support
Hearth Panel
H101a
Fig. 32 Ceramic support.
B-Vent Adapter
For use with other than VCMP B-vent (SK-8) pipe.
Contact your dealer for information.
Outside Air Kit
The Model AK-1 Outside Air Kit is designed to bring
additional combustion air directly from the outside to
the fireplace. Refer to installation instructions provided
with Outside Air Kit.
Heat
Shield
Section A
Heat
Shield
Three (3)
Screws
Side View
Section A
H103
Fig. 33 Heat shield.
