manualshive.com logo in svg

Majestic DBDV36IN, Руководство по установке, Страница: 2 / 73

Поделиться
Скачать
Majestic DBDV36IN Скачать руководство пользователя страница 2

2

Majestic  •  DBDV36IN, DBDV36IL, DBDV42IN, DBDV42IL Installation Manual  •  2397-980 Rev. B  •  5/16

    Safety Alert Key:

• DANGER! 

Indicates a hazardous situation which, if not avoided will result in death or serious injury.

• WARNING! 

Indicates a hazardous situation which, if not avoided could result in death or serious injury.

• CAUTION!

 Indicates a hazardous situation which, if not avoided, could result in minor or moderate injury.

• NOTICE:

 Used to address practices not related to personal injury.

Table of Contents

Installation Standard Work Checklist . . . . . . . . . . . . . . . . . . . . 3

1 Product Speci

fi

 c and Important Safety Information  

A. Appliance Certi

fi

 cation . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

B. Glass Speci

fi

 cations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

C. BTU Speci

fi

 cations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

D.  High Altitude Installations . . . . . . . . . . . . . . . . . . . . . . . . . . 4
E.  Non-Combustible Materials Speci

fi

 cation. . . . . . . . . . . . . . 4

F.  Combustible Materials Speci

fi

 cation  . . . . . . . . . . . . . . . . . 4

G. Electrical Codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
H.  Requirements for the Commonwealth of Massachusetts . . 5

2 Getting Started 

A.  Design and Installation Considerations . . . . . . . . . . . . . . . 6
B.  Good Faith Wall Surface/TV Guidelines  . . . . . . . . . . . . . . 6
C.  Tools and Supplies Needed . . . . . . . . . . . . . . . . . . . . . . . . 6
D.  Inspect Appliance and Components . . . . . . . . . . . . . . . . . . 7

3 Framing and Clearances 

 

A.  Appliance/Decorative Front Dimension Diagrams . . . . . . . 8
B.  Clearances to Combustibles  . . . . . . . . . . . . . . . . . . . . . . 10
C.  Constructing the Appliance Chase . . . . . . . . . . . . . . . . . . 12

4 Termination Location and Vent Information   

A.  Vent Termination Minimum Clearances . . . . . . . . . . . . . . 13
B.  Chimney Diagram. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
C.  Approved Pipe . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
D.  Use of Elbows  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
E.  Measuring Standards . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
F.  Vent Diagrams . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

5 Vent Clearances and Framing 

 

A.  Pipe Clearances to Combustibles  . . . . . . . . . . . . . . . . . . 32
B.  Wall Penetration Framing/Firestops . . . . . . . . . . . . . . . . . 33
C.  Ceiling Firestop/Floor Penetration Framing . . . . . . . . . . . 34
D.  Install Attic Insulation Shield . . . . . . . . . . . . . . . . . . . . . . . 34

6 Appliance Preparation 

A.  Vent Collar Preparation  . . . . . . . . . . . . . . . . . . . . . . . . . . 35
B.  Securing and Leveling the Appliance . . . . . . . . . . . . . . . . 37
C.  Non-Combustible Material Installation . . . . . . . . . . . . . . . 37

7 Venting and Chimneys 

 

A.  Assemble Vent Sections  . . . . . . . . . . . . . . . . . . . . . . . . . 38
B.  Assemble Slip Sections . . . . . . . . . . . . . . . . . . . . . . . . . . 39
C.  Secure the Vent Sections . . . . . . . . . . . . . . . . . . . . . . . . . 40
D.  Disassemble Vent Sections . . . . . . . . . . . . . . . . . . . . . . . 40
E. Vertical Termination Requirements . . . . . . . . . . . . . . . . . . 41
F.  Horizontal Termination Requirements  . . . . . . . . . . . . . . . 42

8 Electrical Information 

A.  General Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
B.  Wiring Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45

9 Gas Information 

A.  Fuel Conversion . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
B.  Gas Pressure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
C.  Gas Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
D.  High Altitude Installations . . . . . . . . . . . . . . . . . . . . . . . . . 47
E.  Air Shutter Setting  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48

10 Finishing 

A.  Facing Material . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
B.  Mantel and Wall Projections . . . . . . . . . . . . . . . . . . . . . . . 50
C.  Decorative Front Dimensions for Finishing  . . . . . . . . . . . 51
D.  Elevated Hearth Systems . . . . . . . . . . . . . . . . . . . . . . . . . 53

11 Appliance Setup 

A.  Fixed Glass Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
B.  Remove the Shipping Materials/Inspect Grate  . . . . . . . . 54
C.  Clean the Appliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55
D.  Install Optional Refractory . . . . . . . . . . . . . . . . . . . . . . . . 55
E.  Ember Placement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55
F.  Install the Log Assembly. . . . . . . . . . . . . . . . . . . . . . . . . . 56
G. Place the Lava Rock  . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62

12 Reference Materials 

 

A.  Vent Components Diagrams  . . . . . . . . . . . . . . . . . . . . . . 63
B.  Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73

 =  Contains updated information.

Содержание DBDV36IN










































































Отзывы:

Нет отзывов