Majestic 33BDVT, Инструкции по установке и Руководство для владельца дома

Страница: 18 / 34

33/36/39/43 BDVT -18- 10002555/0
Vermont Castings, Majestic Products.
1
2
3
4
1 + 2 + 3 + 4 = 270o
Max. 8'
• 7DVCS must be used to support offsets. (Fig. 38)This
application will require that you rst determine the roof
pitch and use the appropriate starter kit. (See Venting
Components List)
• The minimum height of the vent above the highest point
of penetration through the roof is 2'. See Fig. 40.
V
ERTICAL
R
ESTRICTOR
P
LATE
(33BDVT
ONLY
)
When installing the 33BDVT with a Vertical Through-The-
Roof congured ue system the restrictor plate, (#10002495)
supplied with the appliance MUST BE FITTED TO THE
APPLIANCE at installation .
Fitting The Restrictor Plate
1. Remove the window glass/frame assembly.
2. Locate the rebox bafe assembly in the top rear area of
the rebox, Fig. 34.
3. Remove the four (4) nuts along the front edge, and the
three (3) screws along the rear edge of the bafe assembly.
Remove the bafe assembly from the rebox.
4. Remove the two (2) screws from the top face of the bafe
assembly, Fig. 35. Place the restrictor plate as shown in
Fig. 36 and secure by retting the screws.
Firebox baffle assembly
Appliance view from lower front
Use these screws to
attach the restrictor plate
The legs of the restrictor
plate must go down
5. Ret the bafe assembly to the rebox, replacing the three
(3) screws and four (4) nuts.
6. Ret window glass/frame as per the appropriate sections
of this manual.
Fig. 33
Fig. 34
Fig. 35
Fig. 36