majacraft
15
How to Thread the Aura Flyer
Pass the yarn through the large fl yer hook
on the fl yer arm. The yarn goes in the ring
from the fl yer head side and out toward the
orifi ce end of the fl yer.
Thread the yarn through the ring on the end of the fl yer
bar. You can either push it straight through the ring or
alternati vely slip it through the pigtail.
If you are spinning fi ne yarn then take the yarn over the
orifi ce close to the fl yer bar, so it sits in the ‘V’ (delta)
shaped angle, underneath, up between the ‘V’. The delta is
designed to hold the yarn sti ll when spinning fi ner yarns.
And now the Aura fl yer has been threaded.
INCORRECT
CORRECT
Now you can thread the yarn through the large halo
ring.
If you are spinning a very large yarn then bypass the delta
and go straight through the halo.
