Maipu MP2801, Руководство по установке

Страница: 50 / 54

MP2800 Series Router Installation Manual Version 1.0
1 U M o d u l e I n t e r f a c e C a b l e C o n n e c t i o n
ƒ
Step 1: Insert RJ11 plug of 1U cable to LINE jack. Connect another
side to the external lines.
ƒ
Step 2: After power on, please check ACT status of 1U interface
module. If the indicator is off, please check the line.
During the connection, make sure about the ID on the interface to avoid
inserting to other interfaces, which causes the damage of modules and
router host.
1 V O P / 2 V O P M o d u l e I n t e r f a c e C a b l e
C o n n e c t i o n
Inset telephone line to RJ11/RJ45 interface of 1VOP/2VOP, and another
side to telephone.
When having the phone call, pay attention to the indicator of 1VOP/2VOP
card back panel. The indicator and Active light should be on.
During the connection, make sure about the ID on the interface to avoid
inserting to other interfaces, which causes the damage of modules and
router host.
1 V O S / 2 V O S M o d u l e I n t e r f a c e C a b l e
C o n n e c t i o n
ƒ
Inset telephone line to RJ11/RJ45 interface of 1VOS/2VOS and another
side to small switch or external junction box.
ƒ
When having the phone call, pay attention to the indicator of
1VOS/2VOS card back panel. The indicator and Active light should be
on.
During the connection, make sure about the ID on the interface to avoid
inserting to other interfaces, which causes the damage of modules and
router host.
Maipu Confidential & Proprietary Information Page 51 of 55