Maidaid Halcyon Evolution 535WS, Руководство по установке пользователя

Страница: 12 / 19

INSTRUCTION MANUAL FOR DISHWASHERS
Page 9 of 16
UK
Using the SPECIAL PROGRAMME SELECTION button ( 2 ) you can choose between the following
cycles:
S
p
ec
ial
P
ro
g
ramm
e
s
ECO
Reduces energy consumption by washing at lower temperatures and with reduced
water consumption than normal wash programmes; a good washing result is
achieved by a prolonged mechanical washing action.
NEW
Recommended when you wish to wash with a total change of water in the washing
tub, so suitable for consecutive washes of particularly greasy and dirty dishes. The
complete change of the water in the tub requires a longer wash cycle.
LONG
Continuous wash. The cycle can be stopped at any time by pressing the Start button.
After a short pause, the rinse stage will start. The cycle ends automatically after 12
minutes.
GLASS
For dishwashers only: Suited for washing glasses of any shape or type. This
programme washes with a low rinse temperature and requires a long drying time.
WATER
The recommended cycle for sparkling glassware; may be used only in combination
with a reverse osmosis device.
ACT 1
– ACT 2
Suitable for washing very dirty, even encrusted dishes that have been left for some
time. The programme includes 2 washes and 2 rinses.
PRG 4
– PRG 5
Long wash programme for heavily soiled dishes ( 8’ ).
Long wash programme for heavily soiled dishes ( 10’ ).
STEEL
Suitable for washing forks, spoons, knives and all sorts of other cutlery. This wash
programme lasts longer than the other programmes and uses a higher water
temperature.
COLD
Specific programme for glass washers with cold water rinse.
PLATE
Plate programme for glass washers.
SAN
Recommended when the dishes to be washed also have to be sanitized
( EN ISO 15883-1/3 ). This programme controls the wash temperature and time
calculating the constant A0. The programme ends when the A0 value equals 30. The
length is variable, but is generally around 20 minutes and the wash temperature
reaches approximately 70 C°.
N.B. If you require an A0 value other than 30, contact an authorised technician, who
will modify the machine software for you.
The special programmes available may vary according to the machine type and model