Maidaid Halcyon Evolution 535WS, Руководство по установке пользователя

Страница: 13 / 19

INSTRUCTION MANUAL FOR DISHWASHERS
Page 10 of 16
UK
4.4 Filling the rack
Referring to Fig.4
, to ensure the correct operation of the dishwasher follow the rules described below:

Use a suitable rack, fill without overloading and without overlapping the dishes.

Always wipe the dishes before placing in the dishwasher; do not put dishes with dry or solid
residues in the washer.

Place the empty dishes in the rack facing downwards.

Place plates and the like in the sloping rack, with the inner surface facing upwards.

Place the cutlery in the cutlery basket, handle end down.

Do not place silver and stainless steel cutlery in the same cutlery basket as this will turn the silver
brown and may corrode the steel.

Wash the dishes immediately after use, in order to prevent any residue from hardening and sticking
on them.

Use only solid, dishwasher-proof dishes.
4.5 Cycle start-up

To start the programme, press the START button (4); during the wash cycle, the TIME BAR (9)
indicates cycle progress and the display is coloured blue ( Fig. 2b ) and shows the name of the
preselected programme.

At the end of the cycle, the display will turn green and display the word END .

For rapid drying, take the rack out of the machine as soon as the cycle finishes.

To stop a wash cycle early, press the START button (4) again.
4.6 Automatic cycle start-up
This function lets you start a cycle by simply closing the door (or hood) without pressing any buttons. To
enable the function, proceed as follows:
The letter “
A
” on the display indicates that the function is enabled.

If not made available by default, the function must first be enabled via the settings menu.

To disable the function, press the START button (4) for a few seconds while the door is open.
This disabling is only applied for a single wash cycle.
N.B. In hood versions,the automatic start function is automatically enabled after the first work cycle; all
subsequent cycles will start automatically when the hood is closed. This operating mode is indicated by
the letter “
A
” on the display.
4.7 Displaying information

By holding the START button ( 4 ) pressed for a few seconds you can display in sequence the Boiler
temperature, the Tub temperature and the number of cycles performed by the machine.
This information can be displayed both before and during the wash cycle and will only be visible
temporarily.

By holding the PROGRAMME SELECTION button ( 3 ) pressed for a few seconds you can display in
sequence the Boiler temperature, the Tub temperature and the number of cycles performed by the
machine.

The function can be activated by holding the PROGRAMME SELECTION button (3) pressed for a
few seconds .
4.8 Turning the dishwasher off

To switch off the dishwasher, press the ON/OFF button ( 1 ); only the STANDBY LED ( 5 ) will remain
illuminated to indicate that the mains power is on.
N.B. If the dishwasher stays on with the door open for more than one hour, it will switch off automatically.