Maidaid Halcyon AMH50D, Руководство по установке пользователя

Страница: 10 / 15

INSTRUCTION MANUAL FOR DISHWASHERS
Page 7 of 12
UK
Chap 4 USING THE MACHINE
4.1 Key and symbols
Referring to Fig.1 :
1 ON/OFF BUTTON 5 POWER LED
2 DRAIN BUTTON 6 CYCLE UNDERWAY LED
3 PROGRAMME SELECTION BUTTON 7 HEATING UNDERWAY LED
4 START BUTTON
The arrangement of buttons and leds may vary according to the machine type
4.2 Switching the dishwasher on
Referring to Fig.2 :

Turn on the main power switch and open the external water tap.

Check the presence of the overflow.

Press ON/OFF (1) .

The POWER led comes on and filling begins automatically.

After filling comes the heating phase; the HEATING UNDERWAY (7) led stays on until the working
temperature is reached.

The optimal wash conditions have been reached.
4.3 Filling the rack
Referring to Fig.3 , to ensure the correct operation of the dishwasher follow the rules described below:

Use a suitable rack, fill without overloading and without overlapping the dishes.

Always wipe the dishes before placing in the dishwasher; do not put dishes with dry or solid
residues in the washer.

Place the empty dishes in the rack facing downwards.

Place plates and the like in the sloping rack, with the inner surface facing upwards.

Place the cutlery in the cutlery basket, handle end down.

Do not place silver and stainless steel cutlery in the same cutlery basket as this will turn the silver
brown and may corrode the steel.

Wash the dishes immediately after use, in order to prevent any residue from hardening and sticking
on them.

Use only solid, dishwasher-proof dishes.
4.4 Cycle selection and start-up
4.4.1 Under-counter dishwashers

Select the washing cycle suited to the type of dishes using PROGRAMME SELECTION (3) ; with
the button pressed, the shorter cycle is enabled (Fig. 4) .

Start the programme press the START (4) button, the CYCLE UNDERWAY (6) LED starts to flash
(Fig.5 ) .

When the cycle is completed the CYCLE UNDERWAY (6) led goes off

For rapid drying, remove the rack from the machine as soon as the cycle finishes.

To stop a wash cycle early, press down and hold the START (4) button for a few seconds.