5
Thermostat TH 10
1.
Scope of delivery
TH 10 Room thermostat with temperature
sensor and 2 m connection cable (fully
wired), Mounting and Operating Instructions.
2.
Symbols used
2.1 Warning symbols
DANGER
Danger to life.
Non-observance can lead to
death or serious bodily injuries.
NOTICE
Damage to property
Non-observance can lead to
damage to property.
2.2 Other symbols
●
List symbol:
List with important information
about the corresponding
subject.
Action symbol:
List of work to be carried out.
Follow the instructions given in
the order stated.
3.
Product information
3.1 Equipment overview
1
Housing lower part
2
Relay switching state LED
3
Heating/cooling plug jumper
4
Differential gap potentiometer
5 Connecting
terminal
6
PG screw connection
7
Temperature sensor with 2 m connection
cable
8
Rotary knob shaft
9 Cover
10 Setpoint temperature rotary knob
3.2 Intended use
●
Thermostat for controlling fans depending
on the air temperature.
●
For switching one or more fans with a
maximum load of 4 A (inductive) and 10 A
(ohmic load) on and off.
●
Can be operated in heating or cooling
mode. Depending on the operating mode,
the fans switch on if the air temperature
drops below or above preset levels and run
until the setpoint temperature is reached
again.
●
For surface wall mounting in buildings.
●
Setpoint temperature can be set with an
external rotary knob. The operating mode
and differential gap are set inside the unit.
Acknowledgements
© Maico Elektroapparate-Fabrik GmbH. Original
instructions. We are not responsible for
mistakes or printing errors and retain the right
to make technical modifications without giving
prior notice
.
●
GB
