28. Remove the lock tab from the
clutch guide nut by lifting out.
The lock tab is reuseable.
Shown is a new lock tab and one
properly bent to secure the nut.
Not used in 501.
NOTE.
Use Loctite on the 501
clutch nut.
If the clutch nut comes loose
the transmission will engage
two gears at once.
29. Remove clutch center - special
clutch holding tool and 17mm
socket .
.•.
Note: Removing the clutch center
without the Special clutch
tool can cause damage. This
damage will cause the clutch
plates to bind up and the
clutch will slip or not
properly release.
www.maicowerk.com
Courtesy of [email protected]
Square Barrel Engine Manual Service Manual
