9 Commissioning
46
PPB 30 K units is taken into
account in another sub-menu
(PPB 30 K parameters)
Ventilation levels
1
2
Ventilation level “0” pos-
sible
Ventilation level “0” blocked
If ventilation level “0” is set to
blocked, the ventilation units
cannot be switched off at this
control. The units then run
with at least ventilation level
1.
Bold
Factory settings
LED flashes quickly
LED flashes slowly
LEDs
Parameters
Set value /
ventilation level
Setting /
description
Power units (LTs) or
room air controls (RLS)
0
1
2
3
4
5
6
Operation without further
LTs/RLS
Operation with 1 LT or RLS
Operation with 2 LTs or RLS
Operation with 3 LTs or RLS
Slave no. 1
Slave no. 2
Slave no. 3
Adjuster for adding further
room air controls (RLS) or
power units (LTs) to this room
air control. Example: Two fur-
ther RLS (RLS #2 and #3) are
connected to RLS #1.
Set
value
= 2. Set set value 4 on
RLS #2 and set value 5 on
RLS #3.
Notice: Only single-type RLS
combinations are permitted!
230 VAC input
1
2
3
4
5
6
Sleep mode
Intermittent
ventilation
Safety shutdown
Supply air operation without
overrun
Supply air mode with overrun
time of 6 min.
Supply air mode with overrun
time of 15 min.
For setting an additional func-
tion. This can be activated
with a button or switch at the
230 V input.
Содержание PPB 30 O
