Maico PILOT TEST, Руководство по эксплуатации

Страница: 9 / 47

Operation Manual PILOT TEST
8504660
Rev.
3
7 06/11/2019
2.3 Customer Responsibility
All safety precautions given in this operation manual must be observed at all times.
Failure to observe these precautions could result in damage to the equipment and
injury to the operator or subject.
The employer should instruct each employee in the recognition and avoidance of
unsafe conditions and the regulations applicable to his or her work environment to
control or eliminate any hazards or other exposure to illness or injury.
It is understood that safety rules within individual organizations vary. If a conflict exists
between the material contained in this manual and the rules of the organization using
this device, the more stringent rules should take precedence.
This product and its components performs reliably only when
operated and maintained in accordance with the instructions
contained in this manual, accompanying labels, and/or inserts. A
defective product should not be used. Make sure all connections to
external accessories are snug and secured properly. Parts which
may be broken or missing or are visibly worn, distorted, or
contaminated should be replaced immediately with clean, genuine
replacement parts manufactured by or available from MAICO.
NOTE: Customer responsibility includes proper maintenance and cleaning of the
device (see Sections 3.2 and 3.3). Breach of the customer responsibility can lead to
limitations of Manufacturer’s Liability and Warranty (see Sections 2.4 and 3.1).
NOTE: In the unlikely case of a serious incident, inform MAICO as well as your local
distributor.
2.4
Manufacturer’s Liability
Usage of the device in a way deviant from the intended use leads to a limitation or
termination of the manufacturer’s liability in case of damage. Improper use includes
disregarding the operation manual, the operation of the device by underqualified
personnel as well as making unauthorized alterations on the device.
2.5 Device Control
The user of the device should perform a subjective device check once a week
according ISO 8253-1. See Section 6.6 for a checklist.
For annual calibration please see Sections 2.6 and 3.2.
2.6 General Precautions
Before starting a measurement make sure, that the device
works properly.
Use and store the device indoors only. For operation,
storage and transport conditions see Table in Section 6.
For operation in certain places, a recalibration may be
necessary.
WARNING
WARNING