VENTILATOREN
Motorschutzschalter / Motor
protection switch / Disjoncteur-
protecteur intégral MV 25
FR
DE
UK
●
Only connect the MV 25 to a permanent
electrical installation.
Select cable type and
cross-section in accordance with DIN VDE
0298-4.
●
A device for mains separation with at least
3 mm contact opening per pole and a fixed
electrical installation (connection according
to wiring diagram) is required.
●
Operation is only permitted using the voltage
and frequency shown on the rating plate.
●
Connect PE conductor and check the con
-
nection.
●
Test protective-conductor continuity on
housing.
●
Only operate the unit when it is completely
installed.
●
Modifications and alterations are not permit
-
ted and release the manufacturer from any
guarantee obligations and liability.
●
Do not take a damaged unit into operation
and do not allow it to be operated until
repaired.
●
Store packaging material out of the reach of
children
Risk of suffocation if swallowed.
