-
-
-
-
B. CHASSIS
1.
FRAME
The double-down
tube frame is made of high
quality chrome moly tubing. The welds are par-
tially welded with the heli-arc principle and par-
tially welded with acetylene and oxygen. Espe-
cially on areas subjected to high stress often
found
in
moto-cross competition.
2.
TELESCOPIE FRONT FORKS
The telescopie forks with hydraulic dampening
have 180 mm of travel. The springs are mounted
externally on the fork tubes and are covered with
rubber fork boots. The hydraulic shocks are moun-
ted
in
the fork sliders. and have optimal dampe-
ning characteristics:
Each fork tube is filled with 230 cc (7.2 fl. oz.)
of fork oil. The fork tubes are sealed on top with
plugs containing air escape valves. whose proper
functioning
is essential.
3.
SWINGING ARM - REAR SUSPENSION
The swing arm has a very wide bushing surface
with two rubber-metal
bushings. Either Girling
or Koni springs and shocks are available. The
shocks dampening characteristics are especially
developed for Maico.
4.
SEAT
The seat is a one-man seat specially fitted and
developed after years of moto-cross sport. Spe-
cial care was taken selecting the composition
of
the foam rubber
in
the seat for maximum com-
fort.
5.
FUEL TANK
The fuel tank (fiberglass or aluminium
alloy) is
shock-mounted
on the frame with soft rubber
bushings. Two petcocks provide a large volume
of fuel flow.
6.
FOOT PEGS
The foot pegs are short, spring loaded folding
moto-cross foot pegs without
rubber covers.
11. Frame (Bare)
12. Telescopie Fork
7.
HANDLE BARS AND CONTROL LEVERS
The handle bar is made of high quality 22 mm (7/8") diameter chromed tubing, strengthened with a
cross bar. The control levers and twist grip are made by Magura. The clutch and brake lever are made
of cast aluminium
alloy with a ball on the ends for safety. The twist grip, also made by Magura, is made
of plastic with 80 degress of turning movement with the 36 mm carbo All cables are coated with Teflon
for minimum friction.
-
-
-
-
B. CHASSIS
1.
FRAME
The double-down
tube frame is made of high
quality chrome moly tubing. The welds are par-
tially welded with the heli-arc principle and par-
tially welded with acetylene and oxygen. Espe-
cially on areas subjected to high stress often
found
in
moto-cross competition.
2.
TELESCOPIE FRONT FORKS
The telescopie forks with hydraulic dampening
have 180 mm of travel. The springs are mounted
externally on the fork tubes and are covered with
rubber fork boots. The hydraulic shocks are moun-
ted
in
the fork sliders. and have optimal dampe-
ning characteristics:
Each fork tube is filled with 230 cc (7.2 fl. oz.)
of fork oil. The fork tubes are sealed on top with
plugs containing air escape valves. whose proper
functioning
is essential.
3.
SWINGING ARM - REAR SUSPENSION
The swing arm has a very wide bushing surface
with two rubber-metal
bushings. Either Girling
or Koni springs and shocks are available. The
shocks dampening characteristics are especially
developed for Maico.
4.
SEAT
The seat is a one-man seat specially fitted and
developed after years of moto-cross sport. Spe-
cial care was taken selecting the composition
of
the foam rubber
in
the seat for maximum com-
fort.
5.
FUEL TANK
The fuel tank (fiberglass or aluminium
alloy) is
shock-mounted
on the frame with soft rubber
bushings. Two petcocks provide a large volume
of fuel flow.
6.
FOOT PEGS
The foot pegs are short, spring loaded folding
moto-cross foot pegs without
rubber covers.
11. Frame (Bare)
12. Telescopie Fork
7.
HANDLE BARS AND CONTROL LEVERS
The handle bar is made of high quality 22 mm (7/8") diameter chromed tubing, strengthened with a
cross bar. The control levers and twist grip are made by Magura. The clutch and brake lever are made
of cast aluminium
alloy with a ball on the ends for safety. The twist grip, also made by Magura, is made
of plastic with 80 degress of turning movement with the 36 mm carbo All cables are coated with Teflon
for minimum friction.
Maico 72-74.5 Radial Manaual
www.maicowerk.com
Courtesy of [email protected]
