Mahlkonig Pro M Espresso, Руководство по эксплуатации

Страница: 31 / 32

H O R E C A G R I N D E R
GB
31
Problem Cause Solution
The grinder runs
for only a short
time. The indicator
lamp (pos. 7) blinks.
The display reads:
Blockade The grinder spout is
blocked. 1. Switch OFF and ON the grinder.
2. Use the adjustment button (pos. 3) to set to
maximum grind size - coarse.
3. Clean the spout if necessary with a spoon
handle.
4. Start a grind operation.
The grinder grinds itself free.
5. Start another grind operation and set the de-
sired level of fineness.
There is foreign ob-
ject in the grinder. 1. Switch OFF and ON the grinder.
2. Use the adjustment button (pos. 3) to set to
maximum grind size - coarse.
3. Start a grind operation.
The grinder grinds itself free.
4. In the event that the foreign object cannot be
removed from the grinder in this way and con-
tinues to block the grinder, contact your dealer/
service partner.
The grinder does
not start The display
reads: Hopper. The hopper is not
mounted correctly. Correct the placement of the hopper (see page 17).
The grinder does
not start The display
reads: Service. The motor does not
get any electrical
signal. Contact your dealer/service partner.
Document number HC 91311 20110617
Translation from German Original Version