Mahlkonig Guatemala, Инструкция по эксплуатации

Страница: 14 / 28

Before using
Checking the grinder and scope of delivery
NOTE!
Risk of damage!
Opening the packaging incau ously with a sharp knife or other pointed
objects can damage the grinder.
– Proceed very carefully when opening.
1. Remove the grinder from its packaging.
2. Check that the delivery is complete (see
Fig. A, B, D, E, and F ).
3. Check for damage to the grinder or any of the individual parts.
If there is any damage, do not use the grinder. Contact your supplier (see
“Maintenance and service” sec on).
Please note that the grinder has undergone a comprehensive
func onal test prior to delivery and may contain ground co
ff ee
residue.
Se ng up and connec ng the grinder
1. Place the grinder on a level and stable surface that does not vibrate.
2. Make sure that the grinder is switched o
ff (On/O ff switch (13) to 0 ) and
connect the grinder to the power supply by inser ng the power plug (14)
into a properly installed safety socket.
3. Place the collec ng tray (4) into the corresponding casing recess below
the table/vibra ng basket.
• Do not operate the grinder without a collec ng tray; the
co ff ee grounds could get into the inside of the grinder and
damage the grinder.
• Please note that the dispersion of the grounds depends on
the distance between the spout and the hopper: The less the
spacing, the less the dispersion of the co
ff ee grounds.
COFFEE GRINDER
14