Mahlkönig VARIO-W, Руководство по эксплуатации

Страница: 25 / 28

D O M E S T I C C O F F E E G R I N D E R S
GB
10.2 Cleaning the grinder with GRINDZ™
Consistent grinding quality can only be
ensured by regular cleaning. When cleaning
the grinder housing, old coffee oils and
residues should be removed, since these
adversely affect the taste of the coffee.
The coffee grinder cleaner GRINDZ™
ensures thorough, fast and easy
cleaning. GRINDZ™ is a product specially
designed to remove coffee particles
and odours and residues of coffee oil.
a) Remove all beans from the hopper. Press
one of the weight buttons and then the
START button to grind any beans remaining
in the grinder housing.
b) Place the recommended quantity of
GRINDZ™ (35 g = 1 sachet) in the empty
hopper.
c) Set the grinder setting optional to 1, 2 or
3, then press START until all the GRINDZ™
has been ground. Then press START again to
stop the coffee grinder.
d) We then recommend grinding some coffee,
in order to remove all remains of GRINDZ™.
Safety instructions on GRINDZ™:
GRINDZ™ is completely safe in contact
with foodstuffs, and is made from natural
products. The main components consist
of a combination of granules, cereals and
pharmaceutical bonding agents. For this
reason, there is no danger if slight remains
of the cleaner are consumed, nor do they
change the taste of the coffee.
Further information on GRINDZ™ can be
found at
www.mahlkoenig.de .
11. FAULT RECTIFICATION
Observe the safety instructions given
in Chapter 1 at all times!
PROBLEM TIP
The coffee grinder
fails to start when it is
switched on, although
the time continues to
run. Ensure that the hopper
is correctly inserted and
turned clockwise as far as
it will go. The safety switch
must close correctly
The coffee - grinder
functions normally,
but stops abruptly.
Switch off the coffee
grinder immediately.
A foreign body such as
a small stone, a green,
unroasted coffee bean
or a twig may have
blocked the grinder..
The coffee grinder fails
to start after pressing
the Start button. The
motor hums.
There is a foreign body
in the grinder which is
blocking the grinding
discs. Switch off the coffee
grinder immediately!
The motor has overheated
after being over-stressed.
Leave the grinder to cool
down (approx. 30 min.)
before starting it again.
The ground coffee
is not fine or coarse
enough. Check the grind
adjustment.
Incorrect function of
display. Grinder can
still be started. Unplug the grinder. After
5 seconds reconnect it to
the power supply.
If you cannot correct the fault, contact your
authorised dealer. Note the instruction in
Chapter 1 “Danger due to unauthorised repair”.
DANGER
25