Maintenance Manual
MAN-00
167
XYLO
mHawk
February 2012/ Rev1
The repair methods given by the manufacturer in this document are based on the technical specifications
,
current at the time of release. The methods may be modified as a result of changes introduced by the
manufacturer in the production of the various component units and accessories from which the vehicles are manufactured. The reproduction, translation, transmission, in part of
or
whole of the present document,
are prohibited without the prior written consent of Mahindra & Mahindra Ltd. The use of this document by any person other than the trained personnel, at the Authorized Service Centre of Mahindra & Mahindra
Ltd., will amount to unauthorized use and shall be liable for penalty/prosecution
© 2012 Mahindra & Mahindra Ltd.
712-MAT-0014 : 1.00 hrs.
FUEL TANK AND STAINER – CLEAN
Pre removal activities –
•
Lift vehicle on certified hoist.
•
Keep tray below the fuel tank to avoid spillage of fuel while tank removal.
•
Remove the fuel tank drain plug*
(if applicable) and e
nsure for complete fuel drain and Refit the
drain plug.
(27.5 ± 2.5 Nm)
•
Check the fuel quantity before removing tank from the vehicle if the drain plug is not provided.
More care to be taken while removing fuel filled tank from vehicle. Use proper support and
additional manpower to avoid personal injury and other damages.
Xylo mHawk Fuel Tank – Bottom Side View
•
Disconnect the fuel lines – Main and return
line hoses.
•
Disconnect the fuel filler hose and the
breather hose.
•
Disconnect the tank unit WH connector.
Xylo mHawk Fuel Tank – Top Side View
•
Remove the fuel tank from the vehicle, by
removing 04 nos. mounting bolts. Refer
sketches.
•
Remove the ‘Fuel Strainer with main line
assembly’ by removing the fastening bolts.
Fuel Strainer - Schematic
•
Blow the compressed air gradually with low
pressure as per the direction indicated by the
arrow in the illustration above.
•
Clean the fuel tank.
•
Refit the fuel tank and reconnect the main
line, return line, filler hose, breather hose
and tank unit connections.
Post installation activities -
•
Refill fuel in the fuel tank. (Use recommended fuel. Tank MAX capacity is
60L
approx.)
•
Bleed the fuel system, if required.
(Refer 712-MAT-0013)
Page 21
