Diagnostic Manual ( EMS)
LCV MDI BSIII CRDe
Rev 01- Mar 14
All copyrights reserved by
The repair methods given by the manufacturer in this document are based on the technical specifications current at the time of release.
The methods may be modified as a result of changes introduced by the manufacturer in the production of the various component units
and accessories from which the vehicles are manufactured. The reproduction, translation, transmission, in part of whole of the present
document, are prohibited without the prior written consent of 2014 Mahindra & Mahindra Ltd (Truck & Bus Division)
P 007C- Signal range check for the intercooler downstream temperatures sensor
below the upper limit
Reason:
This error is registered when the value is less then the range or when
there is an electrical fault.
Effect:
1.
Torque reduction and System Check lamp ON
Possible Cause:
Short between signal & ground
Check for the short of pin at 73 & 59 ( bent pin)
Check for wire 1 - 59 & 2-73
P 007D- Signal range check for the intercooler downstream temperatures sensor
above the upper limit.
Reason:
This error is registered when the value is less then the range or when
there is an electrical fault.
Effect:
1.
Torque reduction and System Check lamp ON
Possible Cause:
Short between signal & ground.
Corrective Action:
Check for pin back out in the line 2-73
Check open circuit in the line 2 & 79
Check short between pin 73 & pin 75
Check short between wire 2-73 & 3-75
P0236
P0237
P0238
P1235
P1236
P1237
P1238
P0097
P0098
P007C
P007D
Содержание Cosmo
Страница 55: ......