16 Series, Model - 2816 HST
72
NOTE:
When transporting the tractor on the road with the implement
mounted on the three point hitch, always set the flow control knob to the
LOCK position.
IMPORTANT:
Never park a tractor with an implement in the raised
position. Moving the control lever forward will lower the implement even
though the engine is not running. If it is necessary to service the
implement in the raised position, use jack stands to safely block the
implement in place. Put the hydraulic flow control knob in the LOCK
position.
Hitch Lowering Speed Adjustment
To adjust the hitch lowering speed, use the following procedure:
1. Move the hitch control lever for-
ward to lower the implements.
2. Turn the hydraulic flow control
knob to adjust the lowering
speed. Turn the knob counter
clockwise to increase the lower-
ing speed. Turn the knob clock-
wise to decrease the speed or
lock the hitch.
3. After adjusting the speed, raise
the hitch and then lower it to
check the speed.
HYDRAULIC FLOW
CONTROL KNOB
SLOW
LOCK
STEP1
FAST
Lower or block elevated implements and other attachments before
servicing or when leaving the equipment.
M132A
FIELD OPERATION ________________________________________________________
