Mahindra 2016 Scorpio, Руководство пользователя

Страница: 180 / 247

© Copyright Mahindra & Mahindra Ltd. 012016
11-13
To Shift from 4L to 4H
2H
4H
4L
W12K22
1.
Bring the vehicle to a complete stop
2.
Brake pedal depressed
3.
Shift the gear lever into neutral
4.
Turn the four wheel drive selector switch to the 4H position.
The 4WD LOW lamp in the cluster goes OFF and the 4WD
HIGH lamp should illuminate. If the 4WD LOW lamp doesn't go
out within 10 sec, drive forward or reverse for a short
distance, stop the vehicle completely, shift the gear lever into
neutral and operate the selector switch knob again. If the
problem persists contact an Authorized Mahindra Dealer as
soon as possible. There may be a malfunction in the four wheel
drive system
Note that both the lamps will illuminate during shifting.
11.7.2 2WD/4WD Lamps - Instrument Cluster
4WD LOW Lamp
4 WD
LO W
This lamp alerts the driver that the vehicle is in the
4L (four wheel drive low mode). The 4WD LOW lamp
illuminates in the cluster when the transfer case has
shifted to the 4L mode. If the lamp fails to illuminate when the
ignition is switched ON, or the lamp continuously remains ON even if
the switch is not in the 4L position, then have the system checked
by an Authorized Mahindra Dealer.
4WD HIGH Mode Lamp
This lamp alerts the driver that the vehicle is in the
4H (four wheel drive high mode). The 4WD HIGH
lamp illuminates in the cluster when the transfer
case has shifted to the 4WD HIGH mode. If the lamp fails to
illuminate when the ignition is switched ON or the lamp continuously
remains ON even if the switch is not in the 4H position, then have
the system checked by an Authorized Mahindra Dealer.
In case of any malfunction in the transfer case, both 4WD HIGH
and 4WD LOW mode lamps illuminate at the same time. The
vehicle should be taken to an Authorized Mahindra Dealer
immediately.
Situations when both lamps will illuminate at the same time, but it is
not a concern;
• Ignition ‘ON’ initial blink
STARTING AND DRIVING THE VEHICLE