Mahindra 2016 Scorpio, Руководство пользователя

Страница: 178 / 247

© Copyright Mahindra & Mahindra Ltd. 012016
11-11
lever. It allows the operator to choose between three different
modes depending on the torque requirement.
• 2H
• 4H
• 4L
The operator can switch to 4H mode from 2H at any speed. To
engage or disengage 4L from any mode, the vehicle speed
must be zero, and the transmission in neutral.
11.7.1 Operating Instructions/Precautions
W12K18
2H
4H
4L
Use the 4WD selector switch on the floor console to select the
following transfer modes.
2H:
Only the rear wheels are driven at 1:1 speed ratio. Use this
mode for normal driving on dry hard-surfaced roads. This position
gives greater economy, the quietest ride, least tire wear and better
vehicle control.
4H:
All four wheels are driven at 1:1 speed ratio. The four wheel
drive telltale lamp illuminates when 4H mode is selected. This mode
provides additional traction and maximum pulling power for loose,
slippery road surfaces such as ice, snow, gravel, sand and dry
pavement. Front and rear drive shafts are locked together in this
mode which forces the front and rear wheels to rotate at the same
speed.
4L:
All four wheels are driven at 2.48:1 speed ratio. Use this mode
for maximum pulling power and traction. Use 4L position for
climbing or descending steep hills, off-road driving, hard pulling in
sand, mud or deep snow. Front and rear drive shafts are locked
together in this mode which forces the front and rear wheels to
rotate at the same speed. Pro-longed driving in the 4L position on
dry hard surfaced roads may cause increased tire wear and
damage to driveline components. Take care not to over rev the
engine when driving in this mode. When operating your vehicle in
4L, the engine speed (RPM) is considerably higher than that of the
4H position at a given road speed.
STARTING AND DRIVING THE VEHICLE