c-MIG 2800 / 3300
15
EN
5.4.
Wire speed set up
5.4.1. Synergic operation
c-MIG range welding machines offers to The user easy way for set up. In case synergic
mode is used, machine will automatically set up the wire speed corresponding to the
selected voltage step. Set the wire speed potentiometer to the central position to have a
preset value of the wire speed. Adjustment form preset value is possible.
25
12
0
6
9
15
18
21
m/min
1
3
24
5.4.2. Manual mode operation
To disable automatic preset of wire speed, manual mode should be selected by Synergyc
elector. In this case user can set up wire speed direct by wire speed potentiometer according
printed scale in range 0
– 25m/min.
5.5.
NO ARC timeout
If there is no arc detected for more than 3 seconds during active welding the welding process
will be automatically switched off.
This feature may prevent user from some desired actions. In case of feeding the wire in the
torch, please use Manual feed mode described before.
