7
BA083101-en
•
Center the vehicle on the lift when it is in fully lowered position.
•
After positioning the vehicle on the lift secure it against roll-off.
•
Lifts with runways: make sure the vehicle tyres do not contact the roll-off
protection when raising or lowering the lift.
•
Lifts with runways: modifications (such as usage of extensions) are permissible
only under the condition that the functionality of the roll-off protection is
maintained (protective position of ≥ 0.1 m above the runways).
•
The load rating on the identification plate must not be exceeded.
•
Keep the path of movement free of obstructions.
•
Only use the vehicle manufacturer's recommended lift points.
•
Only use lifting supports approved by the vehicle manufacturer.
•
The vehicle must be lifted as a whole. usage of external hoisting and support
devices in combination with the lift must be approved by the manufacturer.
•
Do not use the lift for transporting persons.
•
Lifts with support arms or wheel-free jack: when raising the lift, all support
points at the vehicle body must be engaged at the same time.
•
Lifts with support arms or swing arm jack: use one additional extender or one
support block only for each support point.
•
Lifts with support arms or swing arm jack: check arm restraints for secure
engagement as soon as support arms contact vehicle lift points.
•
Lifts with wheel-free jack: secure engagement of the vehicle must be ensured
by using appropriate means (e.g. lashing straps).
•
After raising the vehicle briefly, stop and check the lift supports for secure
contact.
•
Make sure the vehicle doors are closed during raising and lowering cycles.
•
Make sure the parking brake is applied during raising and lowering cycles.
•
Closely watch lift and vehicle during raising and lowering cycles.
•
Do not allow anyone to stay in lift area during raising and lowering cycles.
•
Lifts with support arms or wheel-free jack: after setting down the vehicle, check
the lift supports for secure contact before raising the vehicle again.
•
Axle lift (if present): observe the installation instructions. Use both hands when
moving the axle lift. The axle lift must be in park position during raising and
lowering cycles.
•
Axle lift (if present): the vehicle must be additionally secured against rolling off
while one axle is in a raised position.
•
Do not allow anyone to climb up the lift or the raised vehicle.
•
Before leaving the lift, fully lower the vehicle or secure it against accidental
lowering.
•
Keep lift and vehicle free of tools and parts.
•
Keep the lift and lift area clean. Risk of slippage on oily floors!
