20
BA083101-en
Pos: 64.9 /Technische Dokumentation/Hebetechnik/00 HBZ Alle/Inhalte/Inhalt: Aufnahmek lötze H BZ - Stapeln (Text) @ 44\mod_ 1459262938946_75.docx @ 2426985 @ 3 @ 1
5.6.1
Stacking Two Blocks on Top of Each Other
Only the “DUO“ hard rubber blocks (VZ 975074) and the ductile plastic blocks (VZ
970045) may be stacked on top of each other, but not more than two blocks per
lifting point.
Pos: 64.10 /Technis che Dok umentation/Hebetechnik/ 00 H BZ A lle/Inhalte/Inhalt: Aufnahm eklötze HBZ - S tapeln ( Bilder) @ 44\m od_1459252038981_ 0.docx @ 2424947 @ @ 1
Pos: 65 / Technische Dokumentation/Alle Geräte/Überschriften/ Überschriften 1.1/H/Überschr ift 1.1: Heben und Senken @ 6\mod_ 1178521944593_75.d ocx @ 91237 @ 2 @ 1
5.7
Raising and Lowering
Pos: 66 / Technische Dokumentation/Hebetechnik/08 Scheren-Hebebühnen/3101 TWIN F IV 3.5/ BA/Inhalt: 0831 Heben und Senk en @ 26\mod_ 1326703330307_75.d ocx @ 1505937 @ @ 1
1 Turn the main switch to position 1.
•
Lift is ready for operation.
2 Push and hold the RAISE button until the lift reaches the desired height.
•
Lift stops once button is released or upper limit stop is reached.
3 Push and hold the LOWER button until the lift reaches the desired height.
•
Lift stops once button is released or CE-Stop is reached.
4 To lower the lift completely, release the LOWER button and push it again.
•
The remaining lift travel to the lower limit stop is accompanied by an audible
indicator.
Risk of injury!
Before lowering the lift to bottom position, verify that there are no persons or
obstructions in the danger area.
Pos: 67 / Technische Dokumentation/Alle Geräte/Überschriften/ Überschriften 1.1/R/ Überschrift 1.1: Rampe verstellen @ 25\mod_ 1318495325701_ 75.docx @ 1062076 @ 2 @ 1
